Tabali minw be yɛlɛmayɛlɛma

Baarabolo sugu

Nafa minw b'a la

Nafa minw b'a la

Koo minw be se ka kɛ

Platfɔri min be yɛlɛmayɛlɛma

Tiɲɛn ɲumanba, yɔrɔ wooman

Sɔngɔ ka ca

A lɔyɔrɔ tigitigi ani -dingɛw laɲiniw

Tabali gwansan min be yɛlɛmayɛlɛma

Sɔngɔ dɔgɔman, labɛncogo nɔgɔman

Dilancogo dingɛman tɛ, tiɲɛni dɔgɔman

Minali kɛcogo ka dɔgɔ, yɛlɛmani nɔgɔman

DD motɛri (min be boli tilennin na)

Fu ye, jaabi barikaman

Doni hakɛ ka dɔgɔ, sɔngɔ ka ca

Ultra tiɲɛtigiya, doni nɔgɔman kokɛcogo

Kamera tilanbaga

Teliyaba, basigiba

Indexation ratio fixe, yɛlɛmayɛlɛmali dɔgɔman

Index yɛlɛmani tuma o tuma (i n'a fɔ mansin min be fa)

Tabali minw be yɛlɛmayɛlɛma ani u dayɛlɛnin lo kosɔbɛ

Hypoid Gear yɔrɔ minw be yɛlɛmayɛlɛma

CAM Roller Tabali minw be yɛlɛmayɛlɛma

Tabali minw be yɛlɛmayɛlɛma, olu be baara gwɛlɛw kɛ

Tabali fila minw be yɛlɛma yɛlɛma

A be se ka kɛ yɔrɔ minw na

Kalan minw kɛra

Wajibiya min be kɛ

Tabali minw be yɛlɛmayɛlɛma, olu ka baara

Otomatiki dilanyɔrɔ ani lajɛn tigitigi

Baarakɛyɔrɔ min be baara kɛ ni ɔridinatɛri ye

Mikro elekitoroniki fɛnw i n’a fɔ telefɔni kamera modɛliw ani sensɔriw ka soudure baara wagati la, a ka ɲi ka baarakɛminan yɛlɛma yɔrɔ caaman na walisa ka soudure kɛ yɔrɔ dɔw la, k’a sɔrɔ a ka ɲi ka juruw bali ka don ɲɔgɔn na (i n’a fɔ soudure marifaw ka yɔrɔw ani tagamasiɲɛw).

1).Platform be baarakɛminanw lasun u ka yɛlɛma ka ɲɛ (ni yɛlɛmani ye min be segi ka kɛ ± 0,01mm), k’a to a ka yɔrɔ min be yɛlɛma, o ka dɔgɔ ni 0,02mm ye;

2).Aw ye soudure marifa ka juru ni gazi tiyo don cɛmancɛ through-wongɛ kɔnɔ walasa ka dɔ bɔ mekaniki ɲɔgɔndan na ani ka baarakɛyɔrɔ labɛncogo nɔgɔya;

3).Ka baara kɛ ni servo motɛriw ye walisa ka se ka yɛlɛma ɲuman kɛ ni 0,1 degere /s ye, ka baarakɛminanw yɛrɛyɛrɛ bali sɔgɔli wagati la.

PCB board sɛgɛsɛgɛli ni sɛgɛsɛgɛli minanw

PCB ka boon ka ɲi ka yɛlɛma degere 90 ani degere 180 la sɛgɛsɛgɛrikɛminanw na, walisa kamera optiki ka se ka yɔrɔw ni sɛrɛkiliw ka fiɲɛw lɔn ka bɔ yɔrɔ caaman na.

1). PCB board yɔrɔw yɛlɛma joona (yɛlɛmani jaabi wagati<0.5s) to improve detection efficiency;

2).Cɛmancɛ through-dingɛ be sɛgɛsɛgɛrikɛla ka juruw ladon PCB board jukɔrɔ walisa ka filiw bali minw be sɔrɔ juru samali fɛ;

3).<0.05mm).

Robotiki fɛɛrɛw ani a labanw

SCARA robo be yɔrɔw lajɛn

3C ka fɛnw lajɛnni na, SCARA robo ka kan ka wale dɔw kɛ i n’a fɔ ka visiw siri ani ka fɛnw yɛlɛma ɲɔgɔn na ni laban yɛlɛmani ye, ani a ka kan ka bɛn ni baarakɛminanw ye minw janya tɛ kelen ye.

1).I n’a fɔ Z-axis rotating joint ka robo, a be se ka segi ka yɔrɔ sigi ± 0.02mm, ka ɲɔgɔn lajɛn ɲuman ka laɲiniw dafa;

2).O yɔrɔ min be yɔrɔ min na, o b’a to visi janw ni jii be tɛmɛ yɔrɔ laban na, ka bɛn ni baarakɛminanw lajɛnni ye minw janya tɛ kelen ye;

3).Kɔfɛ yeelen ka dɔgɔ (<1 arc minute) ensures no jamming during rotation, improving the consistency of screw tightening.

Robo min be baara kɛ ɲɔgɔn fɛ ka minanw tilan

Robo minw be baara kɛ ɲɔgɔn fɛ dumunifɛnw ni furaw tilanyɔrɔ la, u ka ɲi ka minanw yɛlɛma yɔrɔ kɛrɛnkɛrɛnnin dɔ la (i n’a fɔ sɛbɛri min ɲɛsinna sanfɛ) ani u ka ɲi ka bɛn ni minanw marayɔrɔ ye minw bonya tɛ kelen ye.

1).A be ni fɛnw yecogo ye, u be se ka minanw ɲɛsinyɔrɔ yɛlɛma n’u be yɛlɛma yɛlɛma (ni 0,01 degere ) ye walisa ka se ka mɔgɔw tilan cogo tigitigi la;

2).Cɛmancɛ ka tɛmɛ -dingɛ kɔnɔ, o be don pneumatique clamp ka trachee kɔnɔ ani sensɔri ka juru kɔnɔ, o be juru labanw nɔgɔya;

3).High load capacity (axial load>50kg) be dɛmɛ don ka minan caaman minɛ ɲɔgɔn fɛ, o be se ka mɔgɔw tilan cogo fisaya.

Masini tilenninw ani laser minanw

Laser tagamasiɲɛ masin be baarakɛtabali yɛlɛma

Ni baarakɛminan silindirikiw (i n’a fɔ tasa ni beari minw be yɔrɔw latanga), baarakɛminanw ka ɲi ka yɛlɛma degere 360 ​​la walisa ka se ka fɛnw sɔrɔ minw be to ka yɛlɛma, ani laseri yeelen sira ka kan ka bali ka datugu ni juruw ye.

1).Aw ka baarakɛminɛnw lasun u ka yɛlɛma teliya la tuma bɛɛ (ni ± 1rpm ka tiɲɛtigiya ye) walisa ka laser tagamasiɲɛw yɔrɔw nɔgɔya ani u kana tigɛ;

2).Cɛmancɛ tɛmɛyɔrɔ-dingɛ b’a to ji-nɛnɛman nɛgɛdaga ani laser minanw ka tagamasiɲɛ sira be tɛmɛ, o be bali ka juru don laser optiki sira la;

3). Tabali sanfɛla barikaman be yɛrɛyɛrɛli dɔgɔya baarakɛminanw yɛlɛmani wagati la, ka tagamasiɲɛw tiɲɛtigiya lajɛ (sira bonya fili<0.01mm).

Tabali min be yɛlɛma yɔrɔ naaninan na, o ye yɔrɔ duuru ye min be baara kɛ ni masinw ye

Muguw ni awiyɔn yɔrɔw labɛnni na, masin minanw ka kan ka baarakɛminɛnw tigɛ cogo caaman na ni nɛgɛw ye minw be yɛlɛmayɛlɛma, ani u ka kan ka bɛn ni baarakɛminɛnw ye minw be janya (i n’a fɔ nɛgɛw ni nɛgɛw yɔrɔw).

1).I n’a fɔ tabali yɛlɛmayɛlɛmalan naaninan, a be se ka baarakɛminanw tigɛ yɔrɔ caaman na (yɔrɔ tilennin ± 5 arc secondes) ani a be dɔ bɔ nɛgɛkunbɛnnanw hakɛ la;

2).Large aperture hollow design (>100mm) b’a to baarakɛminan janw be tɛmɛ tabali yɛlɛmayɛlɛmalen kɔnɔ, o min b’a to baarakɛminan ni minanw tɛ don ɲɔgɔn na;

3).A labɛnna walisa ka se ka funteniba ni funteni dɔgɔmanw kunbɛn (-10 degere ~60 degere ) walisa ka se ka yɛlɛma nɛnɛfɛnw ni nɔgɔw nɔɔw ma baarakɛyɔrɔ la.

Dɔgɔtɔrɔya ni laboratuwari minanw

Dɔgɔtɔrɔya jaaw CT scanner yɔrɔ

CT sɛgɛsɛgɛri wagati la, banabagatɔ wala sɛgɛsɛgɛrifɛn ka ɲi ka yɛlɛma teliya la tuma bɛɛ, k’a sɔrɔ a ka ɲi k’a yɛrɛ tanga sɛgɛsɛgɛri yɔrɔ ma, motɛriw ka juruw ni sensɔriw ka lɔgɔw kana o bali.

1).Yiriyɛrɛ yɛlɛmani dɔgɔman (yɛrɛyɛrɛ hakɛ<0.01mm) ensures that the scanned image is free of ghosting;

2).Cɛmancɛ through-dinga be farikoloɲɛnajɛ kɔlɔsili juru (i n’a fɔ ECG ani joli nɔgɔw) ladon banabagatɔ fari jukɔrɔ, o be banabagatɔ dususaalo sabati;

3).Encoder absolu be jaabi tigitigi- di wagati yɛrɛ yɛrɛ la yɛlɛmani yɔrɔ kan walisa ka sɛgɛsɛgɛri kɛ ka fili yɔrɔ min sɛgɛsɛgɛ, o be bɛn ɲɔgɔn ma cogo ɲuman na.

Biyosimiki misaliya lɔnniya min be yɛlɛmayɛlɛma a yɛrɛ ma

Anzimi-linked immunosorbent assay (ELISA) ani PCR masinw na, sɛgɛsɛgɛlikɛlan caman ka kan ka yɛlɛma ka taga sɛgɛsɛgɛlikɛyɔrɔ la walisa ka se ka sɛgɛsɛgɛlikɛlanw sɔrɔ, ani a ka kan ka sɛgɛsɛgɛlikɛlanw ni minanw ka juruw bali ka ɲɔgɔn minɛ.

1). Index yɛlɛmani tiɲɛn (index fili<0.1mm) to ensure that the sample tube is aligned with the detection light path;

2) Ɲɛyirali fɛ, yɔrɔ min be yɛlɛma yɛlɛma, o be don kuran juru la ani funteni hakɛ min be sɛgɛsɛgɛrikɛlan ka funteni hakɛ la, o be minanw kɔnɔyɔrɔ labɛncogo nɔgɔya;

3).Mankan dɔgɔman dilan (baarakɛ mankan<50dB) to meet the requirements of quiet laboratory environment.

Ka minanw ladon ani ka minanw tilan

Masini min be tagamasiɲɛw kɛ teliya la, o be tabali yɛlɛmayɛlɛmayɔrɔ bila

N’u be minfɛnw ni ɲɛgɛnw biɲɛw sɛbɛra, biɲɛ ka ɲi ka yɛlɛma siɲɛ kelen walisa ka bɛn n’o sɛbɛri ye ani ka bɛn biɲɛw ma minw bonya tɛ kelen ye.

1).High speed rotation (maximum speed>300rpm) matches the production line rhythm, capable of processing>10000 buteli lɛrɛ kelen kɔnɔ;

2)Pnematique push rod walima sensor wire min be don biberɔn kɔnɔ ka tɛmɛ cɛmancɛ through-wole fɛ, o be bɛn ni biberɔnw ye minw janya tɛ kelen ye;

3).Daminɛ joona jɔ jaabili (teliya wagati<0.2s) reduces the shaking of the bottle during switching and avoids label wrinkling.

Lozisitiki pake tilanyɔrɔ yɛlɛmani fɛɛrɛ

Lozisiyɛli hakilimanw tilanyɔrɔ la, pake ka ɲi ka yɛlɛma ka taga tilanyɔrɔ daa la min be bɛn n’o ye (i n’a fɔ degere 90 , degere 180 ) ani ka pake girinya nɔɔ kunbɛn.

1).High axial load design (>200kg) be se ka pake benni nɔɔ kunbɛn k’a sɔrɔ a ma yɛlɛma;

2) O yɔrɔ min be ni dingɛ ye, o be se ka kɛ sababu ye ka nɛgɛjuru min be mɔgɔw bila ka taga yɔrɔ min na, o be se ka don yɔrɔ min na;

3).Ka baara kɛ ni yelifɛn ye ka yɛlɛmayɔrɔ yɛlɛma wagati yɛrɛ yɛrɛ la (jaabi wagati jan<10ms), improving sorting accuracy.